How Do You Reset The Drum On Brother Printer

How Do You Reset The Drum On Brother Printer?

How Do You Reset The Drum On Brother Printer? Are you trying to print, but your printer won’t let you? Did you just replace the drum, but the printer seems blocked? Well, you need not worry; there is an easy solution to your problem. Today, we will tell you how to reset the drum on your Brother printer. It is a common process that you need frequently after inserting a new drum.

How Do You Reset The Drum On Brother Printer?

 

How Do You Reset The Drum On Brother Printer

If your printer suddenly displays an error message urging you to replace the drum unit, you may wonder if your drum is faulty, but there is nothing wrong with it. Your device has a page counter that determines the maximum number of copies that it can make. When the printer reaches that maximum number of printed pages, the counter makes the printer believe that you need to replace the drum or the toner cartridge.

It can happen even when you just replaced it, so you need to set the page counter back to zero. It is also the solution if your drum is not new, but the printed copies still have a good quality when the error message appears.

May You Like: How Do I Scan Document With Brother Printer

What is the Drum on a Printer Cartridge?

The drum puts the toner (powdered pigment) on paper. You can charge the roller called the photoreceptor drum with static electricity. It uses heat and pressure to fuse toner to the paper. The printer drum unit is an important part of your machine’s functions.

So, when it goes bad, your printer will not well print. It is like riding a bike with a flat tire. Once you have gone through 3 or 4 toner cartridge replacements, you need to replace the drum unit. It is normal to wear and tear for a printer. Most printers come with drums attached to the toner cartridges.

How to Manual Reset the Brother Printer Drum

If you have replaced the printer drum, you may still see the Replace Drum message. Don’t worry; there is nothing wrong with the new printer drum unit.

The printer uses the page counter to estimate the need to replace the drum again. When you replace the drum, the page counter must be reset manually. Here is how to reset the drum life display.

Reset Drum for Brother HL Printer Models

  • Turn the printer on.
  • Open the cover.
  • Leave the cover open during the process.
  • Hold down the GO button for about 4 seconds until all LEDs light up.
  • Then release the GO button.
  • Close the printer cover. The drum has been reset.

Reset Drum for Brother DCP Printer Models

  • Turn the printer on.
  • Replace the drum.
  • Keep the front door open.
  • Press the Clear button.
  • Press the Arrow Up button.
  • When the screen says Accepted, close the front door.
  • The drum unit is reset.

Reset drum for Brother MFC Printer Models

  • Turn on the printer
  • Replace the drum.
  • Keep the front door open.
  • Press the Clear button.
  • Press the 1.
  • When the screen says Accepted, close the front door.
  • The drum unit is reset.

 

 

Leave a Reply

Your email address will not be published. Required fields are marked *